Craft Cove Blog: free beading tutorial
Showing posts with label free beading tutorial. Show all posts
Showing posts with label free beading tutorial. Show all posts

Monday, July 5, 2010

Instructions for following 3d chart patterns

Instructions for following 3d patterns in chart form

Every now and again you may come across a 3d beading pattern that is created in a chart form.  They are usually written in Chinese or Korean.  Here are the instructions for how to follow them written in English.  
There are also some variations to this, but this at least gives a good starting place.

If anyone knows of any errors or things to add, please let me know.

Techniques:
·         Right angle weave, stringing
Difficulty:
·         Moderate


Note:  These images are just examples and not an actual pattern.

You work one circle at the time, marked by the number in Row A.  Start with row B, then work row C.  Then cross the LEFT thread through the last bead to make the total for row D.  The whole 4 rows of the chart create one circle of beads.

The images below show the exact same instructions using the more common pattern method.




This first table shows the very basic information that is sometimes seen in the first part of the pattern

This section above the table will give information like size of beads, colour to start with, etc

A
1
This just states the number for the circle of beads being worked on
B
0
This is the number of beads for the LEFT thread to go through, unless otherwise stated
C
5
This is the number of beads to be added to the RIGHT thread, unless otherwise stated
D
5
This is the total number of beads made in this circle. Crossed with the LEFT thread



 
This shows some more advanced entries that are found in the B row

B row almost always means you need to go through beads already there, and almost always on the Left thread.  A “-“ in between two numbers means both threads are used.
Note: Sometimes characters are used for LEFT and RIGHT or for the colours

B
2-1
The LEFT thread needs to go through two beads already there.  The RIGHT thread needs to go through one bead already there











B
R1
The RIGHT thread needs to go through one bead that is already there, instead of the usual LEFT thread

 




More advanced entries in the C row

The C row tells what needs to be added, usually to the RIGHT thread, unless otherwise stated.
C
3-1
Three beads need to be added to the RIGHT thread, and one bead needs to be added to the LEFT thread

 


C
L2
Two beads are added to the LEFT thread instead of the usual RIGHT thread.

 


Working with colour

Colours are shown by either a character or a circle in a particular colour.  Usually there is a key at the start of the pattern.







 





 




To sum up:  B  means to go through beads already there, and on the LEFT
C  means add beads, on the RIGHT
D means cross left thread through last bead, to give this total number of beads.




Created by Jenny Lawson


For any questions, email me at:  craftcove@gmail.com

More tutorials can be found at:  Jewellery from Craft Cove    http://craftcove.blogspot.com/
Please do not distribute, lend or copy.
Do not mass produce.

Copyright  2010 Jenny Lawson






Wednesday, May 27, 2009

FREE BEADED FLOWER TUTORIAL













3 TIER BEADED FLOWER




Materials:


150cm fishing line,
100 gold size 8/0 hex beads (also known as 2 cut beads)
200 red size 8/0 seed beads
35 black size 8/0 seed beads
1 ivory 6mm imitation pearl

Techniques: Beadweaving, right angle weave

Difficulty: Medium, knowledge of right angle weave is required








Step 1: Ball base: Start with 5 beads, crossover on the last one (bead 5)

Step 2: Add beads 6, 7, 8 and 9 onto the blue thread. Cross through bead 9 with the green thread.

Step 3: Add beads 10, 11 and 12 onto the green thread. Cross through bead 12 with the blue thread.

Step 4: Add beads 13, 14 and 15 onto the blue thread. Cross through bead 15 with the green thread.

Step 5: Add beads 16, 17 and 18 onto the green thread. Cross through bead 18 with the blue thread.

Step 6: Pass the green thread through beads 1 and 6.

Step 7: Add beads 19 and 20 on the blue thread. Cross the green thread through bead 20.

Step 8: Pass the blue thread through bead 7.

Step 9: Add beads 21, 22 and 23 on the green thread. Cross the blue thread through bead 23

Step 10: Pass the green thread through beads 8 and 10.

Step 11: Add beads 24 and 25 to the blue thread. Cross the green thread through bead 25.

Step 12: Pass the blue thread through beads 11 and 13.

Step 13: Add beads 26 and 27 on the green thread. Cross the blue thread through bead 27

Step 14: Pass the green thread through beads 14 and 16.

Step 15: Add beads 28 and 29 to the blue thread. Cross the green thread through bead 29.

Step 16: Pass the blue thread through beads 17, 19 and 21.

Step 17: Add bead 30, and cross over.

Step 18: Take the blue thread and pass through beads 28 and 26.

Step 19: Take the green thread and pass through beads 22 and 24.

Step 20: Tie off, but leave the thread. The base is done. It should look like a ball with lots of holes.




 Now you will add the petals.

The diagram shows where the petals need to be added, basically there will be 3 rows on the beaded base. The first and last rows will have 5 beads, the middle row will have 10 beads.

Step 21: For the first row, just pass ONE thread through the bead next to it. You will be working with this thread only for now. And you will be working on this circle of 5 beads, which will be outer row of petals, and is highlighted in yellow.





Step 22: Thread on 20 gold hex beads, and then pass the thread back through the bead on the base where you started, to create a loop of beads. (The thread path for the first row of petals is shown in the diagram). Pass the thread into the next bead in the circle, add 20 gold hex beads, and loop it back through again. Continue this all the way around the circle of 5 beads on the base.

Step 23: At this stage I like to add a brooch back, if I’m using one, then tie off the thread.

Step 24: Now pick up the other thread and pass it through to a bead in the next row. This second row is highlighted in pink, and will have 10 beads in it. Note: this row of beads doesn’t sit perfectly straight, but has a slight zigzag pattern to it.

Step 25: This time add loops of red size 8/0 beads, I used 20 because the seed beads are smaller than the hex beads, but play it by ear these loops should be a little smaller than the loops in the last row. Make this row like before, passing through a bead, adding the beads for the petals, and passing back through that bead, then pass into the next bead. Continue all the way around forming 10 overlapping petals.

Step 26: Now you’ll be up to the last row, which will have only 5 beads in it again. This row is highlighted in green. This time add only 7 black seed beads to each of the five beads on the base.




Step 27: To make the flower centre, bring the thread from the bottom of the work up through the centre of the base, add the pearl bead, and cross the other thread through the pearl. Pass each thread through a bead near it, as in the diagram. 

 Weave the threads through some beads until the threads meet. Tie off and cut.

 Your beaded flower is now finished!























VARIATIONS: You can use seed beads or any other beads in any of the rows, but each inner row just needs to be a little smaller than the outer ones. You can also leave out the centre pearl, to give a different look to your flower.


  



Please consider making a donation 








Created by Jenny Lawson










For any questions, email me at:




More tutorials can be found at: Jewellery from Craft Cove http://craftcove.blogspot.com/


Please do not distribute, lend or copy.
Do not mass produce.


Copyright 2016 Jenny Lawson




Tuesday, May 12, 2009

FREE HEART TUTORIAL











FILLED IN HEART TUTORIAL







Materials:

60cm fishing line.
32 x 3mm (size 8/0) pink seed beads
36 x 3mm (size 8/0) blue seed beads

Techniques: Beadweaving, right angle weave

Difficulty: Medium






FRONT




Start at circle A, thread on 1 blue and 2 pink beads, crossover threads at bead 3. Continue circles B and C in this manner following bead circles and bead numbers, and keeping an eye on thread colours and bead colours.

At circle D be sure to add beads only on the blue thread, then cross over at bead 12. Follow the pattern up to circle G.

For circle H, again be aware of the beads only on the one thread, and crossover on bead 23. This starts the next row of the pattern.

At circle I watch the numbers and the threads, the red thread needs to go back in to a bead that you added before.

Continue in this manner for the rest of this diagram, pulling tight regularly.

You will notice the beading will want to curve a bit, allow this curve to come outwards towards the front. It should look a lot like the actual diagram.



TOP



You will now be working the top of the heart. The darkened beads means they’re already in there, and just need to be threaded through again.

Both threads will be coming out of bead 37, all that’s needed here is to add 3 blue beads to the blue thread, and cross over the last bead with the red thread.

Circle B needs the blue thread to go into the very first pink bead that you started the beading with in the front section (darkened), and just one pink bead is needed to crossover.

Continue in this way picking up beads from the front section whenever a shaded bead is shown.
Circle D needs 2 beads picked up from the front section.

Circle G is the turnover circle, where only the one thread has beads added.

Continue with the next row. Pulling tight regularly.

The piece should pull together at the top, so that you should now have a backless three dimensional heart shape.




BACK





You now need to turn the piece over to work the back.

All the outer beads are already here, and need to be picked up for every bead circle, except the last one.

Both threads will be coming out of bead 52. Bead circle A has pink beads only on the red thread.

Continue working along the edge, picking up beads from the previous sections and following bead circle letters, and bead numbers, and colours of beads and threads.

Circles D and K pick up beads previously added in this section, as well as previous sections (so watch the numbers).

Circle L doesn’t pick up any new beads at all, it just picks up the beads added earlier to form this last bead circle.

Optional
You can thread an extra bead in each middle section of the filled in colour. If you use the same size bead, it will stand out higher, as in the photo. You can also use a smaller size bead for a subtler effect.

You can also make this with bicones, or any other size beads.








Created by Jenny Lawson










For any questions, email me at: craftcove@gmail.com




More tutorials can be found at: Jewellery from Craft Cove http://craftcove.blogspot.com/


Please do not distribute, lend or copy.
Do not mass produce.



Copyright 2016 Jenny Lawson

Add this

| More